![]() ![]() If desired, repeat procedure to upgrade to 4.3.Then the far end of the link MUST be upgraded using the same proceedureNotes: Launch Craft Terminal and logon using IP address 10.0.0.1 with mini USB cable. 8) Close browser, remove Ethernet cable and restore laptop to DHCP. Ensure “local server” is ticked.6) Proceed to upgrade baseline, browse to R7F11 and follow prompts.7) Once upgrade has completed, repeat steps to upgrade to at least 3.3.7. 2) Note the IP address of the local Minilink NPU.3) Set laptop IP address to +2 of NPU IP address and use subnet mask 255.255.255.2484) Log onto NPU2 using Ethernet cable and IE web browser: control_user / ericsson5) Bring BPFTP on line and back up config file to laptop. The full file structure tn_ftp_home must be stored on your C: drive to provide you with all levels of baseline software to complete the upgrade. Full file structure as stored on Field NMS drive Minimum Craft Terminal 2.2 installed Mini USB cable Ethernet Cable Bulletproof FTP Server installed. Earlier release software requires the use of Internet Explorer and an Ethernet connection.The software should be upgraded at both ends of the link to maintain functionality. To allow use of mini USB cable and Craft terminal with a Vista build laptop, the NPU software must be upgraded to at least R3. Procedure to Upgrade Ericsson Mini-Link TN ETSI NPU2 software 3) Set laptop IP address to +2 of NPU IP address and use subnet mask 255.255.255.248 4) Log onto NPU2 using Ethernet cable and IE web browser: control_user / ericsson Network Drive \\eukremw001\Managed_Service\ Field_Operations\Field NMS\Transmission\ 2) Note the IP address of the local Minilink NPU. Ie when correctly installed, confirm the following in folder CXP9010021_1: C:tn_ftp_home/tn_system_release/ml_tn_software/CXP9010021/ CXP9010021_ R7F11 (12.4.5 ) C:tn_ftp_home/tn_system_release/ml_tn_software/CXP9010021/CXP9010021_ R11H08 (3.3.7) C:tn_ftp_home/tn_system_release/ml_tn_software/CXP9010021/ CXP9010021_ R17B14 (4.3) Upgrade Procedure 1) Clear Internet Explorer Cache, ie remove offline files, content etc. Full file structure as stored on Field NMS drive The full file structure tn_ftp_home must be stored on your C: drive to provide you with all levels of baseline software to complete the upgrade. Requirements prior to starting procedure Minimum Craft Terminal 2.2 installed Mini USB cable Ethernet Cable Bulletproof FTP Server installed. ![]() The software should be upgraded at both ends of the link to maintain functionality. Earlier release software requires the use of Internet Explorer and an Ethernet connection. Procedure to Upgrade Ericsson Mini-Link TN ETSI NPU2 software To allow use of mini USB cable and Craft terminal with a Vista build laptop, the NPU software must be upgraded to at least R3.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |